Hub Motor 36V350W Black Hub Motor for Cassette 26" / 28" & HL1 36V13Ah Battery Conversion Kit DIY E-bike
1.Technical Data and Packing list
Rear motor with 26"/28"(700C) wheel for Cassette x 1:
36V 350W , installation width: 138mm, diameter: 133mm
Gearshift: fit for Cassette(8S/9S/10S)
13G spokes with double wall wheel
Max speed(by throttle): 30-32km/h
Motor cable: 70cm w/o connector
36V 13Ah Battery x 1:
Down tube battery, High power 18650
Coming with a 42V2A Charger
Integrated Controller(in battery holder, Lishui Brand) x 1:
Low voltage protection: 30V
Rated current: 9A
Max current: 18A
Waterproof connectors: motor, PAS sensor, 4 into 1 cable
LCD Display(DASHI C500) x 1:
3.5" LCD screen display with backlight
Cable: 31.5cm w/o connector
5 assist levels, and 6km/h traction with holding down button
PAS Sensor(Left installation) x 1:
Cable: 52cm w/o connector,Dual Hall Sensor, 12 signals output
Brake Levers(Wuxing Brand) x 2:
Cable: 30cm w/o connector
Thumb Throttle(Wuxing Brand) x 1:
Cable: 30cm w/o connector
4 into 1 Cable x 1:
Cable: 150cm w/o connector
Battery Cable x 1:
To connect battery and motor
Free Gift x 1:
*The conversion kits in UK warehouse will be only shipped to address in UK. And the conversion kits in German Warehouse can't be shipped to UK.
*The original pedal sensor in kit isn't fit for Hollowtech II and Octalink. The brake levers are not fit for bike with hydraulic brake.
If your bike has these parts, you can buy these sensors to fit our conversion kit.
*Due to long installation instructions for kits, in order to save resources, we do not have the printed version packing in. You can download the required video installation instructions in the download area of our official website，We will also send an electronic version of the installation instructions after you purchase. Thank you for your contribution to saving resources!
*Please read the installation instructions carefully before you start, this instruction will help you to install the product effectively.
*If you want to return the product, please return the complete product as soon as possible and ensure the product has not been used and doesn’t affect secondary sales.
NOTE：Please set the maximum driving speed of the e-bike according to the local traffic laws to prevent the safety risks caused by excessive speed!
3.Important notice for recycling of used batteries& motor kits
*As a professional seller, we strictly abide by local laws and regulations to ensure product quality, transportation, and storage safety, environmental protection.
*According to electronic consumer goods recycling regulations, batteries and motor kits must not be disposed of with household ordinary waste.
*Consumers are obliged to dispose of the used electronic goods to the professional recycling agency in local for proper disposal. They must not be arbitrarily thrown into the trash. Please protect the environment!
All the contents including words, pictures, and videos are originally made by YOSE POWER.
It is not allowed to plagiarize without permission or we keep the right to pursue legal responsibility.
It´s a great Power Wheel Top !!!!
This is easy to fit, just like changing a tyre and fitting a wheel. Only problems was getting the pedal off so put release oil on and let it sit for a while before using the puller, also i had to drill a new hole because the holes where the bottle was were in the wrong place. My only complaint was the cable ties provided are not strong enough. But once completed it worked great.
Short term test... Lots of power, i only used for steep hills and was fine, easy enough on the flat to leave switched off...great that I have all my gears. Fitting takes time and some patients.. Width of wheel is more for mountain bike if following instructions, I just altered where the spacers went, and added a locking washer.
eine Gute Sache um unsere "guten Räder" zu erhalten
(Donor bike: Btwin Triban 540) Overall very happy. Quick dispatch and fairly straightforward to install with some common sense (the provided instructions are not perfect). Performance is good and I can get up fairly steep hills without pedalling at all. Range is decent - 12 mile hilly round trip used about 25% of the battery. LCD display easy to use.
I fitted to a road bike with drop handlebars so some issues that I had to overcome - the rear wheel hub was a little too wide for rear dropouts and I had to manually bend them apart by some mm but it fit in the end with some difficulty - hope I don’t get a rear puncture! Brake levers are not compatible with drop bars, but I don’t think they are necessary, none of the attachments (throttle, LCD display) fit on the thick road bars, so I used multiple cable ties to tie them on securely, the battery is massive - didn’t fit on my frame due to position of bottle hole attachments, however I used the Topeak alt position adaptor (£10 Amazon) to effectively shift the holes up the frame so the battery now fits perfectly.
The kit seems more designed for MTB or flat bar hybrids, and you need to adapt a little for fitting to a road bike with drop bars.
In the end I have a high performance light road e-bike for a fraction the price of buying a new dedicated one. Absolute game-changer for commuting. Would recommend!
We are glad to receive your feedback and the conversion details with road bike. We will improve our products always. Thank you again!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.